OmegaOps

A public forum for the discussion of airsoft, planning of games, and the general growing of the community within the Lower Mainland.
 
HomeCalendarFAQMemberlistOmegaOpsSearchUsergroupsRegisterLog in

Share | 
 

 Version 7 Gearbox parts compatibility

View previous topic View next topic Go down 
AuthorMessage
Bishop
Member


Posts : 2
Join date : 2014-03-07

PostSubject: Version 7 Gearbox parts compatibility    Fri Mar 07, 2014 2:15 pm

I'm going to be working on a cyma m14 socom16 soon, pretty much going to do a complete tune up. I'm tackling it because I want to learn more about version 7s.

I would like to replace the cylinder head, piston, piston head, spring guide and air seal nozzle. I'll probably stick with stock gears, tappet plate and motor until some thing breaks. Maybe swap out the spring depending on the fps output.

Now here is my question, can I use a v2/3 piston, piston head and gears in a version 7 gearbox? I've seen some v7 gears around, but I'm not sure whats up with them. I've also seen version 7 pistons, like the one from Prometheus.

Also is there any thing about v7 gearboxes that I should know when working on them?

Thanks guys, take it easy.

-karl
Back to top Go down
View user profile
TAK
Member


Posts : 1
Join date : 2014-02-26

PostSubject: Re: Version 7 Gearbox parts compatibility    Mon Apr 07, 2014 2:52 pm

Hey Bishop, I've never personally worked on a Version 7 gearbox however from what I have read most version 2 parts are compatible with the system. With the exception of some of the gears (I believe V7s have specific gear sets).
Back to top Go down
View user profile
Bishop
Member


Posts : 2
Join date : 2014-03-07

PostSubject: Re: Version 7 Gearbox parts compatibility    Mon Apr 07, 2014 2:58 pm

TAK wrote:
Hey Bishop, I've never personally worked on a Version 7 gearbox however from what I have read most version 2 parts are compatible with the system. With the exception of some of the gears (I believe V7s have specific gear sets).

Hey tak, been a long time. I've got the m14 now but I've been so fucked with work that I can't take it down to check inside. From what I've seen the only big difference is the spur gear, it's smaller, regular v2/3 bevel and sector gears work in it. I'll make a post about parts compatibility once I tech the gun fully.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Version 7 Gearbox parts compatibility    

Back to top Go down
 
Version 7 Gearbox parts compatibility
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Gearbox parts
» Gearbox part numbers ?
» is an automatic significantly better
» gearbox parts for a 25t
» bsa bantam nos gearboxs parts

Permissions in this forum:You cannot reply to topics in this forum
OmegaOps :: Main :: Modifications-
Jump to: